sales@libertymachinery.com
sales@libertymachinery.com
Automated Finishing Systems 2H-36
Serial No. 2322
New – 1991
Automated Finishing Systems 2H-36 SPECIFICATIONS:
Floor Area Requirements…………..6’6″ L x 4’6″ W x 5′ H
Work Tray………………………………………40″ H
GENERAL INFORMATION:
The Model 2H-36 Spindle Type Finishing Machine is composed of the following major components: (1) The Rotating Tube that carries the finishing media; (2) The Two Spindle Supporting Heads; (3) The Two Spindle Assemblies; (4) The Structural Base; and (5) The Electrical Controls.
The rotating tub measures 36″ wide in diameter by 18-1/2″ in depth and is fabricated of 3/16″ steel plate of all welded construction with the tub bottom further reinforced with structural channels. A 3″ wide section of the tub at the bottom periphery is perforated and covered on the O.D. with fine mesh screen to allow continual drainage of liquids from the tubs interior.
The tub is mounted on the vertical output shaft of a heavy-duty gear reducer driven by a 15 HP variable speed drive unit for 460 volt, 3 phase, 60 cycle operation with a tub speed of up to 1200 SFM (Surface Feet Per Minute).
The spindle support heads are fabricated of heavy section structural steel members and are rigidly gusseted to provide an integral rigid unit capable of
maintaining positive alignment of the spindle with respect to the rotating tub. Raising and lowering of spindles is accomplished with an air cylinder. Spindles are adjustable through a 20 degree range fore and aft of the flow of material in the rotating tub and from 0 degrees to 20 degrees from perpendicular to the outer periphery of the tub together with 3-1/2″ horizontal extension.
Machine is in good condition and ready to be inspected at our Chicagoland area warehouse.
EQUIPPED WITH:
Texas Instruments Series 305-O5B Programmable Controller
ATC Spindle Counters (2) Each Forward & Reverse
Control for Variable Tub Speed with Digital Tachometer
*Preliminary Specifications Subject to Verification.
Given up on getting rid of your surplus machinery? Liberty’s here to help! We offer immediate cash payments, timely removal, and over 25 years of experience in the industry – all things which make us a leader among used machinery dealers. Our goal is to make selling used machinery as quick and easy as possible. We know you have other things to worry about, so we work hard to streamline the sales process so you can free up floor space and turn surplus machinery into working capital – without all the stress and hassle. Call us at 847-276-2761, go to Sell Your Machinery or email liberty@libertymachinery.com and tell us what you want to sell.
Liberty has an extensive inventory of used machinery for sale, including used metalworking machinery, used fabricating machinery, and used finishing equipment. If you’re looking to buy used machine tools, look no further! We have hundreds of late model, quality machine tools in stock at our Chicago area warehouse, and can find additional equipment through our worldwide networking system. Our goal is to help customers increase their productivity and profits with quality pre-owned machinery at reasonable prices.
We have a clean, 30,000 square foot, climate-controlled warehouse where you can inspect our machines. We offer both in-person inspections and Under Power YouTube video inspections from the comfort of your own office (Click here to see our inspections on our YouTube channel). Check out our extensive inventory HERE.
