Fives Cinetic RK350-20 CNC Centerless Grinder - #47119

Liberty Machine # 47119 Category Make

Serial No. HK-31134
New - 2010
Year Commissioned - 2013

SPECIFICATIONS:
Workpiece Diameter............................................6.0" [152,4 mm] Workpiece Diameter............................................0.50" [12,7 mm] Grinding Wheel Drive Motor....................................50 HP [37,3 kw] Grinding Wheel Diameter - Maximum..............................24" [609,6 mm] Wheel Width - Maximum..........................................20" [508,0 on] Wheel Mounting Hole Diameter...................................12" [304,8 mm] Grinding Wheel Surface Speed........................8,500 ft/min. [43,18 m/s] Grinding Wheel - Maximum....,,....................................@ 1,352 RPM
Grinding Wheel Truing (CNC)..................0.000004" [0,0001 mm] Resolution
Traverse Rate (Across Wheel - IPM)....................................1 to 50
Traverse Rate (Across Wheel - mm/min.)...........................25,4 to 1270
Traverse Distance (Across Wheel) - Maximum..................22.28" [565,9 mm] Profile Depth - Maximum............................................1" [25 mm] Manual Compensation for the Diamond Axis
Regulating Wheel Diameter - Maximum............................14" [355,6 mm] Mounting Hole Diameter..........................................6" [152,4 mm] Width - Maximum..................................................20" [508 mm] Drive Motor (Servo), RPM Selectable..........................18N-m [4.02 kW I
RPM (During Dressing) - Maximum.......................................300 RPM
RPM - Minimum..........................................................15 RPM
Surface Speed (ft./min.)...........................................55 to 1100
Surface Speed (m/sec.)............................................0,28 to 5,6
Regulating Wheel Housing Swivel (Workfeed Angel).....+8 Degrees to -2 Degrees
Regulating Wheel Truing Traverse Drive Motor (Servo)..................2.0 N-m
Traverse Rate (Across Wheel - IPM)....................................1 to 50
Traverse Rate (Across Wheel - mm/min.).............................25 to 1270
Traverse Distance - Maximum.................................21.02" [534,0 mm] Profile Depth - Maximum.........................................0.63" [16 mm] Diamond Compensator
Manual Advance Dial..............................0.0005" [0,0127 mm] Division
CNC Truing...................................0.000004" [0,0001 mm] Resolution
Dresser Swivel, Degrees..............................+6 Degrees to -2 Degrees
Single Axis Slide Drive AC Brushless Servomotor, Two-Way Compensation
Compensator Resolution..................................0.000004" [0,0001 mm] Two-Way Compensation
Infeed Rapid Advance/Retract Rate...............125 in/min. [3,175,0 mm/min.] Number of Feed Rates........................................................3
Feed Rate (Coarse Rate) - Maximum.....................5 in/min. [127 mm/min.] Feed Rate (Coarse Rate) - Minimum................0.001 in/min. [.025 mm/min.] Feed Rate (Medium Rate) - Maximum....................1 in/min. [25,4 mm/min.] Feed Rate (Medium Rate) - Minimum................0.001 in/min. [.025 mm/min.] Feed Rate (Fine Rate) - Maximum....................0.1 in/min. [2,54 mm/min.] Feed Rate (Fine Rate) - Minimum................0.0001 in/min. [.0025 mm/min.] Swivel Plate to Front (Measured to Adjustor)..................0.50" [12,7 mm] Swivel Plate to Rear (Measured to Adjustor)...................0.50" [12,7 mm] Swivel Plate Indicator.....................0.0001 in./Division Dial Indicator
Swivel Plate Indicator.......................0.002 mm/Division Dial Indicator
Lower Slide Travel - Maximum...................................10" [254,0 mm] (2) Slide Clamps.......................................................Manual
Upper Slide Travel - Maximum.................................6.02" [153,0 mm] (2) Slide Clamps.......................................................Manual
Dimensions - Approximate..................................168"L x 80"W x 95"H
Weight - Approximate..................................25,980 Lbs. [11,785 kg]

EQUIPPED WITH:
-Landis 6400 CNC Open Architecture Control System. Machine Control Logic
Executed by ISaGraf JEC-1131. Soft PLC, Grinding Software,
Sercos Fiber Optic Interface, Microsoft Windows Operating System.
Siemens Simatic Flat Panel, Touch HDMI.
-Spare Grinding Wheel Spindle
-Thrufeed Workrest 20" (508mm) with (6) Work Blades
-Thrufeed Grinding Wheel Truing Cam
-(2) Sections, 7' Long Bar Grinding Attachment with Supports
-Regulating Wheel Truing Cam
-Machine Documentation

*Preliminary Specifications Subject to Verification

Sell Used Machinery

Given up on getting rid of your surplus machinery? Liberty’s here to help! We offer immediate cash payments, timely removal, and over 25 years of experience in the industry - all things which make us a leader among used machinery dealers. Our goal is to make selling used machinery as quick and easy as possible. We know you have other things to worry about, so we work hard to streamline the sales process so you can free up floor space and turn surplus machinery into working capital - without all the stress and hassle. Call us at 847-276-2761 or email liberty@libertymachinery.com and tell us what you want to sell.

Buy Used Machinery

Liberty has an extensive inventory of used machinery for sale, including used metalworking machinery, used fabricating machinery, and used finishing equipment. If you're looking to buy used machine tools, look no further! We have hundreds of late model, quality machine tools in stock at our Chicago area warehouse, and can find additional equipment through our worldwide networking system. Our goal is to help customers increase their productivity and profits with quality pre-owned machinery at reasonable prices. We have a clean, 30,000 square foot, climate-controlled warehouse where you can inspect our machines. We offer both in-person inspections and Under Power YouTube video inspections from the comfort of your own office.