sales@libertymachinery.com

847-276-2761

847-276-2761

Used Machinery Inventory

Featured Inventory

Scroll down to see full inventory list.

Click on the drop down menu to select a machine category or browse full inventory below.


0A8175 Automatic Screw Machines, Swiss Type, N/C & CNC
  • 1.25″ Swistek GT-328DDY | 6K RPM, Y-Axis, Live Milling, Fanuc, Barfeed, ’18 – #51203

0B2754 Blast Cleaning/Air & Suction
  • 65 Ft³, Pressure Blast CWB-5058 | Wet, Stainless, 48″ Roll Blasting Fixture, 2018 – #51676

0B7335 Brakes, Press, N/C & CNC
  • 400T AccurPress 740014 | 14′ Bed, 148″ Btw Housings, ETS 3000, Prog. Gauging, ’05 – #51697

0C0856 Casting Machines
  • W&W Co. 0661 Vacuum Wax Injector | 30 psi, 240V, Auto-Clamp, Pressure Controller – #51513

0C1154 Centrifuges
  • Rosler Zentrifuge Z-800 Semi-Auto Centrifuge | 317 GPH, 88 Lbs. Max. Load, 2012 – #51600

0C1678 Chillers
  • 0.4 Ton Haskris R050 | Air-cooled, 55F Min, 2-Zone, 1 GPM/Zone, 2010 – #51139

0C1950 Chucks
  • 12″ Bison 3205-12 | 3-Jaw, 4″ Bore, 2-Piece Jaws, Plain Back Mount(2) – #51761
  • 12″ Bison 3205-12 | 3-Jaw, 4″ Bore, 2-Piece Jaws, Plain Back Mount(2) – #51762

0C1970 Chucks, Drill
  • Albrecht WL130-CAT40 Wrench-Lock | 1/32″ – 1/2″ Cap, UpTo 6,500 RPM (3) – #51581

0C5761 Coolant Filtration Systems, Hi-Pressure
  • ChipBLASTER H30 | 1000 PSI, MistBLASTER, ChipCHILLER, 8 GPM, Dual Filter, 16′ – #51345
  • Hydraulic Systems Coolant Filtration System | 650 PSI, 22 GPM – #43909

0C5901 Coordinate Measuring Machines (Incl. N/C & CNC)
  • 35″X x 47″Y x 31″Z Hexagon GLOBAL S Scan+ 9.12.8 | 5-Tool Changer, 2024 – #51716

0C6600 Mist Collectors
  • LOSMA Darwin 1200 | Guard 20 Pre Filter, 880 CFM, 2.3HP, 5.9″ Inlet, 76 dBa, 2013 – #51335

0D0654 Deburring Machines
  • HD-765 Earth-Chain sPINner | 11 – 26 Lbs. Batch Capacity, 25″ x 10″ Container- #51741
  • Sugino Jet Clean Center JCC-6535E | 5000 PSI, 6-Sta. Turret – #50594

0D0655 Deburring Machines, Centrifugal Disk, High Energy
  • 2 CuFt Hammond Roto-Finish Roto-Max RM-2ND | Dry Process, 5HP, AB Controls – #51682

0D0675 Deburring Machines, Thermal
  • Surftran Thermal Deburring TEM Chamber | 7″ – #49099
  • Surftran Thermal Deburring TEM Chamber | 7″, Cooling Shroud – #49102

0D3749 Drill Sharpeners
  • Accu-Finish Series II | Gun Drill Sharpener, 1″ Drill Capacity, Microscope, 115V – #51757

0D4554 Drills, Gun
  • 3/4″ x 15″, Eldorado M75-1032 | 3HP, 1,445-11,740 RPM,26″Lx20″W Fixture Area, 03′ – #50983

0D4810 Drills, Heavy Duty
  • Central Machinery 39955 | 20″Sw, 4.75″Strk, 17.5″ x 15.5″ Tbl, MT4 – #51735

0D8300 Dust Collectors
  • 1231 CFM, Torit 84 | 3 HP, 6″ Inlet, Filter-Type, Filter Shaker – #51176
  • 3,000 CFM Donaldson Torit VS-3000 | 354 ft² Filter Area, 7.5 HP – #51708

0E2400 Electric Discharge Machines, Conventional, Ram Type, Sinker
  • Makino EDGE3i | 23″ x 17″ Tbl, 17″X, 11″Y, 12″Z, C-Axis, ATC, Hyper-i CNC, 2019 – #51711

0E2460 Electric Discharge Machines, Small Hole, N/C & CNC
  • +GF+ AgieCharmilles Drill 20 | 11″x15″Tbl, 11″X, 7″Y, 11″Z, 7″ Drill Depth, ’12 – #51675

0E6550 Environmental Chambers
  • 20″W x 18″D x 24″H Associated Environmental LH-6 | -4°F to 201°F, Humidity, ’10 – #51251
  • 24”W x 24”D x 24”H Thermotron S-8C | Temperature, -68°C to +177°C (2) – #51457
  • 25″W x 15″D x 15″H Thermotron ATS-320-DD-10-705 | Hot to 200C, Cold to -73C(2) – #51447
  • 25″W x 15″D x 15″H Thermotron ATS-320-DD-10-705 | Hot to 200C, Cold to -73C(2) – #51448
  • 25″W x 15″D x 15″H Thermotron ATS-320-V-10-705-LN2 | Hot to 200C, Cold to -73C – #51449
  • 37″W x 37″D x 37″H Thermotron SM-32C | Temp & Humidity, -40C to 180C(3) – #51444
  • 37″W x 37″D x 37″H Thermotron SM-32C | Temp & Humidity, -94 to 356°F, 2007(3) – #51693
  • 40″W x 39″D x 46″H Thermotron SE-1200-5-5-S | Temp & Humidity, -70C to 180C, 2000 – #51446
  • 44″W x 37″D x 44″H Thermotron FM-64-SS-5 | Temp & Humidity, 10°C – 90°C, 2018(2) – #51455
  • 44″W x 37″D x 44″H Thermotron FM-64-SS-5 | Temp & Humidity, 10°C – 90°C, 2019(2) – #51456

0F1650 Finishing Machines
  • 5.3 Ft³ Rosler RF/700SF Drag Finisher | 4-Spindles, (3) Bowls, Siemens, 2018 – #51673
  • Almco 2SF-36 Spindle Series Finishing & Deburring Machine (2014) – #50110 (4 Available)

0F3275 Forklifts, Telescoping Boom
  • 4000 Lb. Toyota 7FGCU20 | 7.6′ to Fork Face, 24″ Load Center, 6.3′ Turning Radius – #51739

0F5350 Furnaces, Box, High Temperature
  • 59″W x 47″H x 43″D, Nabertherm N2000/60HA DB200-4 | 1,112F, Electric, 2018 – #51135

0F8526 Furnaces, Sintering
  • Dr. Fritsch DSP 517 | 60T, 8.85″ OH, 3-Fold Ctrl, 31″ Sq. Pressing Area, 2020 – #51350

0G1100 Gear Hobbers, Horizontal
  • Barber-Colman 16-16 | Sgl. Thread Index Worm, Hob Shift, Rapid Traverse, Dwell – #51115

0G3754 Granulators
  • MPE 600 Series 3-Hi Gran-U-Lizer 666 “F” | (3)6″ x 8″ Rolls, 4 – 270 US Mesh, ’14 – #51465

0G4204 Grinders, Centerless - Accessories
  • Norton 110C Grit Diamond SMD Grinding Wheel | 18″ x 10″ x 8″ Cap. – #47378
  • Unison DedTru Model C | 0.25″ – 1.25″ Part Cap, DC Ctrl, Sine Base – #51745

0G4306 Grinders, Centerless
  • #2-OM Cincinnati | Part Dia. 1/16″ – 4-3/4″, 8″ W x 20″ Dia Whl, 15 HP, Hyd – #51695
  • Cinco 15 Cincinnati | 3″Cap., 24″x8″Whl, 15HP, Reg Whl Tach – #51696
  • Royal Master TG-12×4 | 1.5″ Cap, Auto-Cycle, Contour Dress, Infeed w/Eject, ’99 – #51143
  • Royal Master TG-12×4 | 1.5″ Cap, Auto-Cycle, Contour Dress, Infeed w/Eject, ’99 – #51144
  • Supertec STC-20 | 0.004″ – 4.72″ Cap, Hyd. Dresser, 20 HP, Coolant System, 2004 – #51759
  • TG12X4 Royal Master | Hydraulic Profile Dresser, Infeed Lever, Coolant, 1992 – #51220

0G4315 Grinders, Centerless, N/C & CNC
  • Monza 1500 | 6.5″Ø Cap, 14″W x 20″Ø Whl, 40HP, Fanuc Ctrl, Infeed Automation, ’14 – #51283
  • Royal Master TG-12X4 Hi-Accuracy | 0.002-1.5″ cap., BEDROCK Series, Coolant, 2018 – #51373

0G4765 Grinders, Cylindrical, Plain, Angle Head, N/C & CNC
  • 13″Sw x 25″Cc Okuma GP26W | 7.9″ Grind Ø, 5.9″W x 24″Ø Whl, 20HP, Rot. Dress, ’17 – #51570

0G4800 Grinders, Cylindrical, Universal
  • 10″ x 40″ Kellenberger 1000U-125 | 3-Wheel Design, ID Spindle, Coolant System – #51401
  • 16″ x 40″ Kellenberger 1000U | 3-Wheel Design, ID Spindle, Coolant System – #51509
  • Kellenberger 1000U | Universal Cylindrical Grinder – #51715

0G4820 Grinders, Cylindrical, Universal, N/C & CNC
  • 11.8″ Sw x 25.6″ CC Jones & Shipman Suprema 650 Easy M | 3-Whl Design, 2016 – #51363

0G6325 GRINDERS, FORM
  • Glebar FW-9D | 1″ Dia x 5″ L Cap, Accuracy 25µm, 9″ Whl, Plunge Grinding, 2007 – #51091

0G8025 Grinders, Surface, Reciprocating Table (Horizontal Spindle)
  • 12″ x 24″ Chevalier #FSG-3A1224 | 14″ x 2″ Whl, 5 HP, 3-Axis Auto, DRO, 2016 – #51758
  • 16″ x 32″ Okamoto ACC-16.32DX | 14″x1.5″Whl, Auto-Feeds, Over Whl Dress, ’18(2) – #51754
  • 16″ x 32″ Okamoto ACC-16.32DX | 14″x1.5″Whl, Auto-Feeds, Over Whl Dress, 2017(2) – #51756
  • 6″ x 12″ Mitsui MSG-200MH | Hand Feed, Perm-Mag Chuck, Lube System, 1984 – #51434
  • 8″ x 20″ Okamoto ACC-8.20DX | 8″x3/4″ Whl, 2 HP, Auto-Feeds, Electro-mag Ck, ’95 – #51473
  • 850 x 400 MM Okamoto ACC84DX | 14″x1.5″Whl, Auto-Feeds, Over Whl Dress, 2016 – #51755

0G8030 Grinders, Surface, Reciprocating Table (Horizontal Spindle), N/C & CNC
  • 15.75″ x 23.6″ Amada Techster 64 | 14″ x 2″ Whl, 5HP, Coolant, Chiller, 2013 – #51594
  • 8″ x 20″ Okamoto ACC-8.20DXNCP | 8″ x 3/4″Whl, 2HP, Servo Downfeed, Fanuc OM – #51689

0G8935 GRINDERS, VERTICAL UNIVERSAL, N/C & CNC
  • 30″ x 24″, Campbell 750 | 30″ Table, 30HP, 7200RPM, Spindle Swivel, Rotary Dress – #51547

0H3250 Heat Treating Units, Induction Heating
  • Pillar AB7102-107/MKII Induction Hardening System | 200 KW – #47872

0H5875 Hones, Abrasive Flow
  • Dynetics HL30 | 6.25″Ø Cylinder, 30 GPM Displacemnt, 500 PSI Media, Media Chiller – #50963
  • Extrude Hone 77C | 3.25″ Media Cyl (convertible), 2000 PSI, Touchscreen, 1994 – #50312
  • Extrude Hone Media (Kennametal) EH-13/36 | Burr & Stock Removal (7) – #50614
  • Extrude Hone Spectrum 10-8-8 | 10″ Media Cyl, 8″ Hydraulic Cyl, 1200 PSI, 2005 – #50667
  • Extrude Hone Vector 200 Special | Hi-Pressure, 1-Way Flow, AB Micrologix, 2003 – #51328

0H5890 Hones, Automotive
  • Sunnen CK-21 | 12″ Stroke, 3/4″ – 8″ Diameter, Auto Feed, 1,500 Lb. Part Cap – #51627

0H5950 Hones, Diamond Bore Sizing
  • Engis LPM-6000 | UpTo 6″ ID, 6-Spdl, 10-Pos Table, Clnt Filt, Mits Ctrl, 2016 – #51538
  • Engis LPM-6000 | UpTo 6″ID, 6-Spdl +Chamfer, 10-Pos Tbl, Clnt Filt, Mits Ctrl,’13 – #51472
  • Engis SPM Series | 6-Spdl, 8-Pos Rot. Tbl, 0.060″ – 1.5″ Range, PLC Ctrl – #51362
  • Engis SPM Series | 8-Spdl, 10-Pos Rot Tbl, 0.060″-1.5″ Range, Clnt Filt, PLC, ’04 – #51274

0H5975 Hones, Horizontal
  • Sunnen CGT Style Diamond Coated Hones – #40780
  • Sunnen KGM-5000-E | 0.153″ – 1.260″Ø Cap, 0.31″ – 6″ Length Cap, Pwr Strk, 02′ – #51386
  • Sunnen MBB-1660 | 0.060″ – 6.5″Ø, 16″L Part, Manual Stroke, Filter, Tooling, 2006 – #51686
  • Sunnen MBC-1800 | 0.060″ – 6.5″ Ø, 16″ Strk, Pwr Strk, Auto Cyc, Stone Saver, ’85 – #51683

0H6004 Hones, Vertical
  • 6″ID x 12″ Stroke Ohio Tool Works OTW VersaHone Vertical V-12-1 | Mits Ctrl, 2017 – #51602

0I4806 Inspection Equipment
  • General Inspection GI-360 | 500 PPM, 4-35mm Ø, 10-150mm Length, 2010 – #51680

0K3004 Keyseaters
  • 5.9″W x 43.3″L MECO Mec 150 | Servo, 59″ Dia. Index Tbl, 5,500# Part Cap, 2012 – #51308

0L0754 Lapping Machines
  • 20″ Lapmaster 20 | Serrated Cast Iron Plate, Slurry System, Rings & Weights – #51748
  • Speedfam Non-Serrated Cast Iron Conditioning Rings (Lot of 2) | 12″ID x 3″H – #49450
  • Speedfam Serrated Cast Iron Conditioning Rings (2 Available) | 12″ID x 3-7/16″H – #49452
  • Speedfam Serrated Cast Iron Conditioning Rings (Lot of 2) | 12″ID x 1-13/16″H – #49451
  • Speedfam Serrated Cast Iron Rings (4) | For 32″ Machine – #49444

0L2125 Lathes, Chucking, N/C & CNC
  • 90″ x 236″ Karats L-28N Turbine Disc Lathe | 86″ Chuck, 150 RPM, Fanuc 18i-TA # – 50952

0L3000 Lathes, Engine
  • 14″ x 40″ Enterprise EL-2 | 1.5″ Bore, 8″ 3-Jaw Chuck, Inch/Metric Threading – #51436
  • 15″ x 54″ Leblond Makino Regal Servo Shift | 8″ 3-Jaw Ck, Stdy Rest, Tailstock – #51729

0L3504 Lathes, Gap, Removable Gap
  • 22″/31″ x 120″ Acra 22120 | 19.5″ 4-Jaw Ck, 4″ Bore, 2-Ax DRO, Splash Guard, 2007 – #51500
  • 22″/31″ x 120″ Tarnow TUJ50M | 3-Jaw Chuck, Steady Rest, (18)20-1600RPM, 3.5″Bore – #51205

0L4304 Lathes, Precision, Jewelers, Toolroom, Etc.
  • 11″ x 18″ Feeler FTL-618E | Inch Threading, 1.25″ Bore, 5″ chuck, 5C Collets, ’04 – #51430
  • 11″ x 18″ Hardinge HLV-H | Inch Thrd, Taper, 5C Collet, Compound Cross, 1990 – #51424
  • 11″ x 18″ Hardinge HLV-H | Inch Thrd, Taper, 5C Collet, Compound Cross, 1993 – #51402
  • 11″ x 18″ Vectrax CTL-618EVS | In/mm, 5C Collet, 6″Ck, 1.5″ Bore, 2019 – #51705
  • 11″ x 18″ Victor 618 EM | In/mm, 3,000 RPM, 5C, 5″Ck, Aloris Post, 2002 – #51073

0L4904 Lathes, Speed
  • Hardinge HSL59 | 3-Speed, 750 – 1800 – 3000 RPM, 9″ Sw, 10″ Bed (2) – #51280

0L6135 Lathes, Turning, N/C & CNC
  • Mazak Integrex 100-IV ST | 21″Sw, 29″L, 2″Bar, 6K Spdls, 12K Tool Spdl, ’09(3) – #51477
  • Mazak Integrex 100-IV ST | 21″Sw, 29″L, 2″Bar, 6K Spdls, 12K Tool Spdl, ’13(3) – #51478
  • Mazak Integrex 100-IV ST | 21″Sw, 29″L, 2″Bar, 6K Spdls, 12K Tool Spdl, ’13(3) – #51479
  • Mori Seiki NL2000/500 | 8″Ck, 2.5″Bore, 20″L Cap, 12-Sta Turret, Prog Tail, 2007 – #51192

0M0115 Machining Centers, CNC, 5-Axis or More
  • OKK VP400 | 5-Axis, 23″X, 16″Y, 18″Z, 12K RPM, Dual-Platter Trunnion, 2010 – #50761

0M0185 Machining Centers, Vertical, N/C & CNC
  • 40″X, 20″Y, 20″Z Fadal VMC-4020HT | 48″x20″Tbl, 10K RPM, 21-ATC, CAT 40, ’04 – #51533
  • 60″X, 30″Y, 30″Z MAG Fadal VMC-6030HT | 62.5″ x 30″ Tbl, 24-ATC, CAT 40, ’08 – #51532
  • Haas VM-3 | 54″x24″ Tbl, 40″X, 26″Y, 25″Z, 30 HP, 12,000 RPM, 510 IPM, 2008 – #51713
  • Haas, VF-4, 52″x19.5″ Tbl, 50″X, 20″Y, 25″Z, 10K RPM, 650 ipm, 24ATC, 30HP, 2013 – #51712

0M0190 Machining Centers, Vertical, CNC, Graphite
  • Litz Hitech Mitsubishi DM-800G | 35″ x 19″ Tbl, 31″X, 19″Y, 21″Z, 20K RPM, 2015 – #51714

0M0758 Marking Machines, Laser
  • Rofin Easy Jewel | Vanadate, 1064 nm, 20 W, IP 22, 2007 (2) – #51439
  • Rofin Easy Jewel | Vanadate, 1064 nm, 20 W, IP 22, 2007 (2) – #51440

0M1870 Millers, Knee, N/C & CNC
  • Bridgeport Series I EZ-TRAK | 9″x48″Tbl, 30″X, 12″Y, 16″Z, DX Control, R-8, 2000 – #51760

0M2824 Millers, Vertical
  • Series I Bridgeport | 9″ x 48″ Tbl, 30″X, 12″Y, 16″Z, 2 HP, Power-X – #51702

0M3277 Mixers, Solids
  • Bellaform BSW-135 | High Shear, Continuous, Roller type, Up to 110 Lbs./Hr. – #51367

0N5230 Notching Machines
  • JF Kidder No. 43 “The Little Blacksmith” | 5″x5″, 7″Thrt, 11Ga Mild, 14Ga Stnlss – #51737

0O7397 Ovens, Batch
  • 19″W x 18″D x 19″H Despatch LAC-38A-4 | Benchtop, 500°F, +/-5.4°F – #51460
  • 26″x26″x26″H Precision Quincy 26-650 | 650 Deg F, Stainless, Chart Recorder, 00′ – #50949
  • Despatch LFD Series Oven | Benchtop – #51461

0O7500 Ovens, Vacuum
  • T-M PC-26 | 350°F, 26″ x 26″ x 26″ Chamber, 23.2 cfm, 10^-8 torr, 2004 – #51353

0P3454 Polishing Machinery
  • 5″ Rand Bright BH-50, Belt Type, Thru-Feed, 4″ Belt, 1 – 30 FPM, Dry, 3HP- #51727
  • Acme C-2 Centerless Polishing Machine | 6″ Dia. Cap. – #47327

0P3790 Presses, C-Frame
  • 40T Greenerd HCA-40-30R | 0 – 24″ Strk, 36″DLO, 15″Thrt, 26″ x 15″ Bed, 20HP, ’02 – #51468

0P4834 Presses, Gap Frame, Single Crank
  • 88T Amada TPL 80SI | 5″Strk, Wet Clutch, 17.9″SH, 40″ x 23″ x 5.3″ Bolster, 2000 – #51544

0P5102 Presses, Hydraulic
  • 50T Hannifin OGF-50 | 0-24″ Strk, 22″ Thrt, 12″x30″ Tbl, 5.5″Ø Ram, 8″ Cyl. Bore – #51408

0P5298 Presses, Hydraulic, Straightening
  • 100 T Eitel RP-100 | 8″ Stroke w/7/8″ Adjustment, 38″ DLO, WR Shaft Attach, ’80 -#51029

0P8915 Punch-Shears & Ironworkers
  • Peddinghuas Peddiworker 1050 | 105 T, 10″ Throat, 5″ Angle Cap, 16″ x 3/4″ Flat – #51765

0P9082 PUNCHES, PORTABLE
  • Rotex 18 | 1/8″ – 2-1/4″ Cap, 8 Tons, 18″ Throat, 18 Station, Hand Actuated – #51731

0R5603 Rolls,Plate Bend'g,Init.& Dbl.Pinch Type(Incl.Sheet Mtl.)
  • 2-1/3″ x 10′ Faccin-Biko 3158 | 3-Roll, Hyd Drop End & Roll Adj, 75 HP, 2014 – #50892

0S0653 Saws, Band, Horizontal
  • 7″ x 12″ Turn Pro 01712041 | Horizonal/Vertical Operation, 1 HP – #51732

0S0690 Saws, Band, Vertical
  • 16″ DoAll 1612-0 | 3/4″ Blade, 12″ Work Height, Variable Speed, Blade Weld/Grind – #51481

0S1154 Saws, Plate
  • DoAll 2618 Band Mill Plate Saw | 32″ X 40″ Table, 1.5″ Blade – #48271

0T0130 Tables & Indexers, N/C & CNC
  • 6.7″ Nikken 5AX-2MT-170-200FA, Dual-Axis Trunnion, Fanuc Servo, 2005 – #51117
  • Haas HA5C2 | 2- Spdl, 5.875″ Center Ht, 10#/5# Cap, 5C Collet, Air Collet Closer – #51606
  • Haas HRT110 | 4.33″Ø Platter, 3′” Center Ht, 20 Lb. Cap, ±45 Arc-Sec Accuracy – #51574
  • Nikken CNC 200 LF 4th Axis Rotary Table | 8″ Cap. – #47800

0T0140 Tables, Rotary
  • Matsumoto MDB-200 w/TH-200 Tailstock | 9″ Table Ø, 2″ Thru-Hole, 7.25″ Center Ht. – #51213

0T2412 Testers, Vibration
  • 13KIP Unholtz-Dickie T1000 | w/Thermotron Temp & Humidity Chamber, 1996 – #51451
  • 8KIP LDS Bruel & Kjaer V875-440T | w/Thermotron Temp & Humidity Chamber, 2000 – #51453

0T2805 THREADERS, PIPE (Nipple Machines, Pipe, & Tube Cutters)
  • Ridgid 535 | 1/8″ – 2″ Cap, 115V/1Ph, Reamers, Manual Chuck – #51736

0T3953 Tooling & Accessories
  • 1″ Proto 6022B Torque Wrench | 140-700 Ft-lbs, 2-5/8″ Head Width – #51240
  • 1″ Proto 6022B Torque Wrench | 140-700 Ft-lbs, 2-5/8″ Head Width – #51241
  • 12.5″ Buck Face Plate | 1.75″ Bore, D1-6 6 Cam Lock – #50899
  • Barrett Chip Spinner Basket for 301-E | 16″x9″ Basket, 75 Lbs. Cap, 5 Gallon Cap. – #51531
  • Lapmaster 20201B-LAP | 9-3/8″ CC, 0.020″ Range, Flat Bar – #51665
  • Lapping Ring – Engis | 16″, Stainless Steel & Ceramic – #51322
  • Pressure Plate – Engis LM0308 | 14″ – #51321
  • Robot Load System, AWR VBX-160 | 6.6# Payload, 8″ x 8″ x 8″ Part Cap, Fanuc, 2020 – #50917
  • Stanley Vidmar RP3502AL | (7) Drawers, 29″L x 22.5″W x 59″H, Forktruck Base – #51658
  • Stanley Vidmar SD175RH1 | 29″L x 30″W x 30″H Ext, 27″D x 27″W x 24.5″H Int, (2) – #51659
  • Stanley Vidmar SEP3054AL | (12) Drawers, 29″L x 30″W x 59″H, Forktruck Base (2) – #51644
  • Stanley Vidmar Small Version Cabinet | (6) Drawers, 29″L x 22.5″W x 59″H – #51657
  • Sunnen Honing Mandrel 3K-P28-4750SD | 4.730″ – 4.875″ Ø Range, 3 Stone – #51722
  • Sunnen Honing Mandrel 5H-P28-2500WG | 2.480″-2.625″, 5 Stone – #51723
  • Sunnen Honing Mandrel Y88-3000PG | 2.990″-3.125″, 4″ Stone Length – #51726
  • Sunnen Honing Mandrel Y88-3125PG | 3.115″-3.250″, 4″ Stone Length – #51725
  • Sunnen Part Support Fixture KKN-800 | 15 Lbs. Cap, MBB, MBC – #51743
  • Whirl-Dex Indexer | 4.625″ Center Height, 360° – #51323

0T3980 Tooling & Accessories, N/C & CNC
  • Lyndex C40S5-0562-2.93 | CAT40, #0-9/16″ Hand Tap, 1/8″ Pipe Tap, UpTo 5K RPM (4) – #51580
  • Nikken CAT40-C1-85U | 1/8″ – 1″ Clamping Range, UpTo 20K RPM, KM1 Collet (12) – #51579

0T5301 Transformers, 3-Phase, 60 Cycle, Dry Type
  • Federal Pacific T4T30E | 30kVA, 480V Primary, 208/120V Secondary, 3 Phase, Dry – #51613
  • SquareD 75T3H | 75kVA, 480V Primary, 208/120V Secondary, 3 Phase, Dry Type, (2) – #51609

0V2248 Variable Speed Drives
  • FC-302 Danfoss VLT AutomationDrive | 131B6808, 2021 – #51746

0V4750 Vises
  • Kurt D688 AngLock | 6″ Jaw Width, 8.8″ Opening, 2″ Jaw Height, Steel Jaws(2) – #51763
  • Kurt D688 AngLock | 6″ Jaw Width, 8.8″ Opening, 2″ Jaw Height, Steel Jaws(2) – #51764

0W0360 Washers (Individual Batch)
  • 100″Ø x 48″H Proceco Typhoon HD100 | 6000 Lb. Cap, Gas, Sludge Conveyor, 1999 – #51597
  • 28″ x 28″ x 18″D ADF 11 Dunk Washer | 2000 Lb. Part Cap, Agitation, Heat, ’05(4) – #51060
  • 28″ x 28″ x 18″D, ADF 11 Dunk Washer, 2000 Lb. Part Cap, Agitation, Heat, ’05(4) – #51059

0W0760 Water Jet Cutting, CNC
  • OMAX 2626 JetMachining Center | 46″x31″Tbl, 26″X, 26″Y, 8″Z, 30HP, 60K PSI,’18(2) – #51605
  • OMAX 5555 JetMachining Center | 80″x65″Tbl, 55″X, 55″Y, 8″Z, 30HP, 60K PSI, 2014 – #51604
  • OMAX Bulk Abrasive Delivery System | 600 Lb. Hopper Capacity – #51721
  • OMAX EnduroMAX P3060V Intensifier Pump | 60,000 PSI, 30 HP, 0.67 GPM – #51718
  • OMAX Laminar Filter | CLS, Gravitational, Sediment Pump – #51720
  • OMAX VS-SRS | 5.6 lbs/min Garnet Removal, VFD, 0.75 Yard Hopper – #51719
  • Waterjet Flow i-6012 | 6′ x 12′, 5-Axis, Dynamic Z-Axis, 8″Z, 60K PSI, Pro Software, ’07 – #51130

0W0870 Water Treatment Equipment
  • 1,200 GPD OMAX WJ-RO1200 Water Softening System | 600 Gal. Tank, 2014 – #51668
  • 6 GPM OMAX Central Water Recycling System PSI-TWRS-400-PCM | 2014 – #51666

0W2210 Welders, Laser
  • Trumpf TruLaser Cell 3000 | 31.5″X, 23.6″Y, 15.7″Z, TruDisk 3000, 2020 – #51699

0W2500 Welders, Portable
  • 350 Amp Miller Syncrowave 350 | CC AC/DC, Tig, Stick, Bernard Chiller, Foot Pedal – #50977
  • Miller Dialarc HF | 10-310Amps, 250A @ 40% Duty Cycle, 230V – #51733

0W3752 Welding Positioners
  • 50000 lb. Aronson Welding Positioner GE500FBCS | Tilt-Turn – #45643
Facebook Twitter Youtube Linkedin Instagram Pinterest

111 Schelter Road
Lincolnshire IL 60069

Phone: 847.276.2761   Fax: 847.276.2762

sales@libertymachinery.com

Menu